900W 1200W LightWelder Portable Laser Welding Machine With Refrigerant Gas

900W 1200W LightWelder Portable Laser Welding Machine

HS-LITE S30 & HS-LITE S40 Refrigerant-Cooled Handheld Laser Welding Machines

The LITE S30 and LITE S40 combine handheld welding flexibility with dual-circuit direct refrigerant cooling. Available with 900W and 1200W laser output,

they are designed for thin-sheet metal fabrication, maintenance, and general workshop applications.

The integrated cooling system provides active temperature control without a circulating-water loop, eliminating routine cooling-water replacement and simplifying daily maintenance.

Up to 4X faster than TIG
Easy to learn and operate with highest process consistency
High quality welding of thick, thin and reflective metals without distortion, deformation, undercut or burn-through
Welding of dissimilar metal parts of different thicknesses
Dramatically low heat input and minimized heat affected zone
Minimal part setup and post-processing grinding or polishing
Increased productivity with no need for machining or straightening deformed parts.

New Design Laser Weld Gun / Laser Torch 

It can perfectly replace some traditional argon arc welding and electric welding in the welding of thin stainless steel plate, iron plate, aluminum plate and other metal materials;
Light weight, small size, ergonomic design and comfortable grip;
The operation is easy to get started, and the requirements for operators are extremely low;
Beautiful welding seam, fast speed, no welding marks, no discoloration, no need for later polishing;
Strong anti-interference.

The new laser hand-held welding head adopts international standard three-color warning light, which conforms to EU safety production standards.

Control System of Laser Welding Machine 

The HS-LITE S30 and HS-LITE S40 offer two different methods for adjusting settings:
1. You can adjust settings and control the units via a mobile app.
2. You can use the physical dial on the device: rotate it to the right to increase the parameter values, or rotate it to the left to decrease them

EMISSION indicator light: It lights up when the laser is turned on and goes out when the laser is turned off

INTERLOCK indicator light: It will go off when the welding torch is connected to the clamping line, and light up when the welding torch is disconnected from the clamping line;

GAS indicator light: The device will light up when it is not connected to gas or when the gas pressure is too low

WARNING indicator light The device will light up when a warning is triggered.

ERROR indicator light It lights up when the equipment experiences a fault.

Wire Feeder

Wire feeder is included as standard equipment; the laser welding machine comes with an HS-WFS-A wire feeder, which supports wire diameters of 0.8mm, 1.0mm, 1.2mm, and 1.6mm.

Weld method

Flat position weld 

Horizontal position weld

Vertical position weld

Overhead position weld